Description

 Speedometer 0-360km / h
Speed ​​adjustment (adjustment range 300-2500mm adjustment unit 1mm)
Speed ​​warning light (adjustment range 30-360km / h adjustment unit 1km / h)
Maximum speed record (display range 0-360km / Adjustment unit 1km / h)

■ Needle tachometer 0 to 13000 rpm Rotation speed indicator (adjustment range: 1000 to 13000 rpm Adjustment unit: 100 rpm)
■ Digital tachometer Rotation speed indicator 0 to 20,000 rpm (adjustment range: 1,000 to 20,000 rpm adjustment unit: 100 rpm))
Ignition adjustment (adjustment range 0.5 ・ 1 to 24 adjustment range Hi Act Lo Act)
■ Calendar:
It is displayed on the home screen when the key is turned on by setting the calendar / month / day / day.
The day of the week is automatically entered when the year and month are set.

■ Odometer 0 to 999,999 km
(Display unit: returns to 0 when the range is exceeded) Mileage
total
User odometer setting (arbitrary entry of distance from starting point)

■ Daily counters A, B 0 to 9999.9 km
(Display unit: Exceeds the range of 0.1 km) and 0 to return)
by an external switch operation, switch the display to trip odometer B
Oil exchange time warning mileage you enter.
Maintenance distance (notification mode)
(adjustment range: 500 to 16,000 km adjustment unit: 100 km)

■ Position of the report
(display content: all displayed reports, all hidden reports)
Report number recording function by learning mode

■ Clock, voltmeter, thermometer, fuel gauge

■ Clock / day of the week
(setting range: 12 hours or 24 hours) The
day of the week is automatically entered when setting the year and month.

■ Voltmeter
(Display range: 8-18V)
Voltage indicator (Adjustment range 8-18 V Adjustment unit: 0.1 V)

■ Thermometer (Display range: 0-250) By purchasing the Takegawa SP drain bolt separately, the temperature can be measured at the drain bolt.
Temperature indicator (adjustment range: 60 to 250 ° C)
Maximum temperature recording (adjustment range: 0 to 250 ° C)

■ Fuel gauge (display range: 6 levels)
Preset fuel sensor resistance value
100Ω 250Ω 270Ω 390Ω 510Ω 1200Ω
User resistance value adjustment resistor Value range: 0 to 1500Ω Control indicator
fuel

■ Air-fuel ratio meter (display range: 12.1 to 17.5)
A Takegawa SP O2 sensor and separate O2 sensor boss are required.
How to install the O2 sensor boss: It is necessary to make a hole in the exhaust pipe and fix the O2 sensor boss by welding.
The thermometer and the air-fuel ratio indicator cannot be displayed at the same time.
The function display can be switched depending on the connected sensor.

■ Power test function
Target speed recording
Recording the Target Distance
Recording of the maximum speed (Top Speed)
Each record is displayed as a record. The highest record is displayed at the top, and the numbers 2 and below are displayed in measurement order. The recording can be reset.
For the target speed / distance setting, set the value specified in the function settings.

■ Control lamp Warning lamp / Turn signal / High beam
Neutral warning light / Engine warning light
oil check / ABS warning light

■ External switch
All operations and function settings of the counter use the external switch attached to the counter. ■ Backlight
Day / night mode LCD display AUTO switching function Brightness adjustment function Lighting color switching function (White, red, orange, green, blue, yellow)
Day mode can only change the tachometer scale

The tachometer scale and the dimming part of the main LCD screen can be changed.